Metal Damper

A vibration damper takes energy out of the system. When you increase the damping in a mechanism or structure there will be a reduction in vibration and noise and the dynamic stresses applied will be reduced with a resulting benefit to the fatigue life – among many other benefits.

Products

Here you can find all our products in this category.

All-Metal Mount VTCI-300F – VTCI-700F

All-metal Mount VTCI-300F – VTCI-700F used for suspension of machine tools in general, especially crushing machines and grinding mills. Elastic…
All-Metal Mount VTCI-1500F

Vibratecs all-metal mount for use as elastic fix point. Vibration damping elements are made of 18/8 stainless steel wire mesh,…
All-Metal Mount VTCI-3500F

Vibratec Cushion Isolator for use as elastic fix point. Isolator with equifrequency character; 15-20 Hz for the recommended load range.…
Spring Package AVM

Our custom made spring vibration isolators are designed for outdoor offshore and marine installations. The steel structure is often manufactured…
Steel Mount AVM

The custom made cushion vibration isolators are designed for outdoor offshore and marine installations. The cushion vibration isolators are typically…
Metal Cushion VT1502 – VT1504 – VT1505 – VT1506

All-metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over a…
Metal Cushion VT1120 – VT1140

All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
Metal Cushion VT1110, VT1130

All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
Metal Cushion VT 1405

All-metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency within a…
Metal Isolation Mount V43 – V46 and V43HW – V46HW

All metal mounts for vibration isolation of machine tools with high dynamic forces where damping also is required. The elastic…
Shock Absorber VT-XM

Steel mounting with excellent shock absorption capacity, highly resistant to fatigue. It is made of a stainless steel and an…
Spring Isolator VT41XX

A very soft spring isolator with integrated adjustable snubbing. This isolator has a natural frequency between 5-9 Hz and a…
Spring Isolator VT4090

A very soft isolator with integrated adjustable snubbing. Designed especially for suspension of mobile equipment. Vibration isolation and suspension of…
Steel Mount VTCI-2000S-A4

Vibratec Cushion Isolator for use as elastic sliding support. Resilient elements and isolator structure parts are all made of AISI316…
Metal Pendulum Mount VTCI-300F-P – VTCI-700F-P

Double acting all metal pendulum mount for isolation against vibrations and shock of exhaust-, air- and steam-pipes. Stabilisation of frames…
Metal Pendulum Mount VT281P – VT283P

Double acting all metal pendulum mount. Resilient element, cushion in stainless steel wire. Other parts in painted mild steel.
Metal Pendulum Mount VT345P

Double acting all metal pendulum mount. Resilient element, cushion in stainless steel wire. Other parts in painted mild steel.

No products found