Metal Cushions
Metal cushions are mouldings made from a wire mesh set with elastic properties which are used on their own or in combination with fittings. They optimise oscillation isolation and reduce noise. Typical applications are: Exhaust systems, powertrains, electronics, filtration/emission, bodyworks, add-on parts, engines, auxiliaries and safety systems.
Metal cushions have the following benefits:
- Shock-absorbing and vibration-isolation
- Corrosion-resistant against solvents, acids, oils, greases, liquids and dust
- Resistant to age – no permanent deformation, no hardening and no creeping
- Temperature range: -90°C to +300°C
- Long lifespan
- Made of stainless steel
- Requires little space
- Easy to mount
Products
-
Metal Cushion VT 1405
All-metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency within a…
-
Metal Cushion VT1110, VT1130
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
-
Metal Cushion VT1120 – VT1140
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
-
Metal Cushion VT1502 – VT1504 – VT1505 – VT1506
All-metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over a…
-
Metal Cushion VT-HMEE-K
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
Products
Our products with metal cushions as an isolator
-
All-Metal Mount VTCI-1500F
Vibratecs all-metal mount for use as elastic fix point. Vibration damping elements are made of 18/8 stainless steel wire mesh,…
-
All-Metal Mount VTCI-3500F
Vibratec Cushion Isolator for use as elastic fix point. Isolator with equifrequency character; 15-20 Hz for the recommended load range.…
-
Spring Isolator 7002
An all-metal and light weight isolator mount. This series of isolators have an almost constant natural frequency, 7-10 Hz. Spring…
-
Steel Mount AVM
The custom made cushion vibration isolators are designed for outdoor offshore and marine installations. The cushion vibration isolators are typically…
-
Metal Cushion VT1502 – VT1504 – VT1505 – VT1506
All-metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over a…
-
Metal Cushion VT1120 – VT1140
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
-
Metal Cushion VT1110, VT1130
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
-
Metal Cushion VT-HMEE-K
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
-
Metal Cushion VT 1405
All-metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency within a…
-
Metal Isolation Mount V43 – V46 and V43HW – V46HW
All metal mounts for vibration isolation of machine tools with high dynamic forces where damping also is required. The elastic…
-
Spring Isolator VT42XX
A very soft spring isolator with integrated adjustable snubbing. This isolator has a natural frequency between 5-9 Hz and a…
-
Spring Isolator VT4090
A very soft isolator with integrated adjustable snubbing. Designed especially for suspension of mobile equipment. Vibration isolation and suspension of…
-
Metal Mount VT-DZ
An all-metal vibration isolator for a resilient suspension of motors, pumps, generators and exhaust pipes.
-
Metal Mount VT-DZ-S
An all-metal vibration isolator for a resilient suspension of motors, pumps, generators and exhaust pipes
-
Metal Mount V 118 – MG – V 318
All-metal mounts with equifrequency characteristics for the defined load range.
-
Metal Pendulum Mount VTCI-300F-P – VTCI-700F-P
Double acting all metal pendulum mount for isolation against vibrations and shock of exhaust-, air- and steam-pipes. Stabilisation of frames…
-
Metal Pendulum Mount VT281P – VT283P
Double acting all metal pendulum mount. Resilient element, cushion in stainless steel wire. Other parts in painted mild steel.
-
Metal Pendulum Mount VT345P
Double acting all metal pendulum mount. Resilient element, cushion in stainless steel wire. Other parts in painted mild steel.
-
Pipe Clamps VTPC 100-900
A very rigid construction that allows quick mounting/dismounting of the pipes. The resilient elements are non-creeping, are unaffected by oils,…
Interested in Metal Cushion
Feel free to contact us for more information
- Marine
Vibration Isolation of marine engines
If you are planning a midsummer trip in the Stockholm archipelago you can take one of the boats MS Sjögull or MS Sjöbris. You will get a smooth and silent journey as these have recently been renovated; the engines are suspended on Vibratec marine isolators VT41 (spring isolators) with the gear boxes on cushion isolators type VTCI.
