Sensitive Equipment

Using Vibratec’s extensive range of Wire Rope Isolators and elastomeric shock mounts, most equipment can be suspended successfully.

Examples of common applications are electronic boxes, computers, monitors, radar units and similar. To use the correct equipment for the particular stress of Your case, Vibratec engineers performs the correct shock calculations.

Our Products!

Products

Here you can see all products in the application area

Category

All-Metal Isolation Mounts (3) Elastomer Mounts (1) Metal Cushion (3) Metal Damper (2) Metal Hangers (1) Rubber Damper (1) Shock Damper (13) Spring Hanger (1) Spring Isolator (3) Wire Rope Isolators (13)

Elastomer Mount M 7 – M 1500

Low frequency rubber isolator primarily for vibration isolation of rotating machinery. The design allows for large deflection resulting in low…
Spring Isolator VT7001

A series of isolators with almost constant natural frequency of 7-11 Hz (within the recommended load range). The isolator is…
Spring Isolator VT7002

An all-metal and light weight isolator mount. This series of isolators have an almost constant natural frequency of 7-10 Hz.…
Spring Isolator VT4570

A series of low frequency all-metal isolators with a natural frequency of 7-10 Hz within a wide load range. May…
Metal Cushion VT1120 – VT1140

All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
Metal Cushion VT1110, VT1130

All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
Wire Rope Isolators – WRI-AXX

Wire rope isolators are typically used in aerospace, defense, industrial, and marine applications to reduce the transmission of vibration and…
Spring Isolators V403 – V406

All metal isolator of the double-action type, designed for loading in tension and compression. Isolation of exhaust systems, especially on…