Exhaust Pipe Suspension

Vibratec’s unique all-metal exhaust suspensions have been implemented in thousands of ships since the mid 1970:s. A major reason for our success is the fact that all our products are so well adapted to their purpose; as the isolators are all metal, they are insensitive to one of the main problems with exhaust suspensions – the heat.

The life-expectancy of Vibratec’s solution is the same as that of the exhaust system itself so it does not need to be replaced during its life span. We provide complete technical proposals to our customers including: Filled-in Auto-CAD drawings with proposed products and positionings, reaction force and noise calculations , expansion joint calculations with proposed pre-tension, a list of materials, principal installation instructions, quotation and product data sheets.

Go to Our Products!

Pipe suspension and silencer on the ferry Merkurius. Suspended with our all metal VTCI mounts for vibration isolation.

Category

All-Metal Isolation Mounts (12) Bulkhead Penetration (2) Exhaust Bellows (3) Metal Cushion (13) Metal Damper (10) Metal Hangers (9) Pipe Clamp (3) Shock Damper (1) Spring Hanger (6) Spring Isolator (6)

All-Metal Mount VTCI-300F – VTCI-700F

All-metal Mount VTCI-300F – VTCI-700F used for suspension of machine tools in general, especially crushing machines and grinding mills. Elastic…
All-Metal Mount VTCI-1500F

Vibratecs all-metal mount for use as an elastic fix point. A progressive tension/compression isolator with resonance frequency 15-20 Hz throughout…
All-Metal Mount VTCI-3500F

Vibratec Cushion Isolator for use as elastic fix point. Isolator with equifrequency character; 15-20 Hz for the recommended load range.…
Spring Isolator VT4570

A series of low frequency all-metal isolators with a natural frequency of 7-10 Hz within a wide load range. May…
Metal Cushion VT1120 – VT1140

All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
Metal Cushion VT1110, VT1130

All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
Metal Cushion VT-HMEE-K

All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
Metal Isolation Mount V43 – V46 and V43HW – V46HW

All metal mounts for vibration isolation of machine tools with high dynamic forces where damping also is required. The elastic…
Steel Mount VTCI-2000S-A4

Vibratec Cushion Isolator for use as elastic sliding support. Resilient elements and isolator structure parts are all made of AISI316…
Metal Mount VT-DZ

An all-metal vibration isolator for a resilient suspension of motors, pumps, generators and exhaust pipes.
Metal Mount VT-DZ-S

An all-metal vibration isolator for a resilient suspension of motors, pumps, generators and exhaust pipes
Metal Mount V 118 – MG – V 318

All-metal mounts with equifrequency characteristics for the defined load range.
Spring Hanger VT-4523

All-metal hanger with spring made of high tensile steel. For isolation of pipes, fans and cooling units. Scroll in aluminum…
Spring Hanger VT4524-0X

All-metal hanger, perfect for isolation of pipes, stabilisation of frames and equipment. Spring made of high tensile steel. Resilient cushion…
Spring Hanger VT4524-2X

All-metal hanger, perfect for isolation of pipes, stabilisation of frames and equipment. Two springs made of high tensile steel and…
Spring Hanger VT4524-4X

All-metal hanger, perfect for isolation of pipes, stabilisation of frames and equipment. Four springs made of high tensile steel and…
Exhaust Bellows VTAB

Exhaust bellows are designed and used to absorb vibration and the thermal expansion of the engine. The bellows, the flexible…
Exhaust Bellows VTAS

Exhaust bellows are designed and used to absorb vibration and the thermal expansion of the engine. The bellows, the flexible…
Exhaust Bellows VTAD

Exhaust bellows are designed and used to absorb vibration and the thermal expansion of the engine. The bellows, the flexible…
All-Metal Pendulum Mount VTCI-300F-P – VTCI-700F-P

Double acting all-metal pendulum mount for isolation against vibrations and shock of exhaust-, air- and steam-pipes. Stabilisation of frames and…
Metal Pendulum Mount VT281P – VT283P

Double acting all metal pendulum mount. Resilient element, cushion in stainless steel wire. Other parts in painted mild steel.
All-Metal Pendulum Mount VT345P

Double acting all metal pendulum mount. Resilient element, cushion in stainless steel wire. Other parts in painted mild steel.
Spring Isolators V303 – V308

Isolation of exhaust systems, especially on ships. Isolation of various pipes (pressurised air or fluids). Protection of fragile equipment during…
Spring Isolators V403 – V406

All metal isolator of the double-action type, designed for loading in tension and compression. Isolation of exhaust systems, especially on…
Pipe Clamps VTPC 100-900

A very rigid construction that allows quick mounting/dismounting of the pipes. The resilient elements are non-creeping, are unaffected by oils,…
Bulkhead Penetration VT-BHP

Vibratec provides a series of watertight bulkhead penetrations. They are delivered as complete sets, with no need for drilling or…
Penetration Clamp VT-FTPC

VT-FTPC is an all metal pipe clamp with resilient elements made of stainless steel 18/8. Ring and base plate made…