Engine Isolation Mounts
Isolation of propulsion engines and generator sets can be done by using rubber or all metal isolators. Depending on the application we can choose from a vast array of different solutions designed to work the best with your equipment.
Vibratec dimensions an optimal solution with respect to your engine effect, gear box, coupling and forces due to roll, pitch and heave. In difficult cases we use customized solutions to reach the desired vibration isolation performance.
![](https://www.vibratec.org/app/uploads/2024/04/marine-engine-mount-vt41xx-sjobris-1280x720.jpg)
Category
-
All Metal Mount VTCI-300F – VTCI-700F
All Metal Mount VTCI-300F – VTCI-700F used for suspension of machine tools in general, especially crushing machines and grinding mills.…
-
All Metal Mount VTCI-1500F
Vibratec Cushion Isolator for use as elastic fix point. Resilient elements are made of 18/8 stainless steel wire mesh, center…
-
All Metal Mount VTCI-3500F
Vibratec Cushion Isolator for use as elastic fix point. Isolator with equifrequency character; 15-20 Hz for the recommended load range.…
-
Cylindrical Dampers
Cylindrical dampers are cost-effective and convenient items for damping vibrations from, for example, motors, generators, machinery, and other vibrating equipment.
-
Elastomer Mount DMS 077 – 158
An elastomer mount with resilient elements in natural rubber (NR) or nitrile (NBR) in shorer hardness 40 or 60 shore.…
-
Elastomer Mount DMS020
Rubber isolator for engine and machine suspension in land based and marine applications. Available in hardness 40, 55 or 70…
-
Elastomer Mount PC 100 – 182
An elastomer mount with resilient elements in natural rubber (NR) or nitrile (NBR) in shorer hardness 45, 55 alt. 65…
-
Elastomer Mount PC 270
Resilient elements in natural rubber (NR) or nitrile (NBR) in shorer hardness 45, 55 alt. 65 shore. Metal parts in…
-
Elastomer Mount HD Marine
Low frequency rubber (NR) vibration isolator designed for use under propulsion engines and other marine applications.
-
Spring Isolator VT4421
All metal isolators. Spring in high tensile steel, resilient cushion made of 18/8 stainless steel wire mesh.
-
Spring Isolators VT4412 and VT4422
This is a metal isolator made with a spring in high tensile steel, resilient cushion of 18/8 stainless steel wire…
-
Spring Isolators VT4413 and VT4423
This is a metal isolator made with a spring in high tensile steel, resilient cushion of 18/8 stainless steel wire…
-
Spring Isolator VT4414 – VT4424
All-metal spring isolators, spring in high tensile steel, resilient cushion in stainless steel, scroll in aluminum.
-
Metal Cushion VT1502 – VT1504 – VT1505 – VT1506
All-metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over a…
-
Metal Cushion VT 1405
All-metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency within a…
-
Metal Isolation Mount V43 – V46 and V43HW – V46HW
All metal mounts for vibration isolation of machine tools with high dynamic forces where damping also is required. The elastic…
-
Spring Isolator VT44XX-DM
Springs with high-class anti-corrosion protection for use in harsh environment, outdoors in marine and offshore applications.
-
Spring Isolator VT41XX
A very soft spring isolator with integrated adjustable snubbing, shock damping. Designed especially for suspension of mobile equipment for example…
-
Spring Isolator VT42XX
A very soft spring isolator with integrated adjustable snubbing, shock damping. Designed especially for suspension of mobile equipment for example…
-
Spring Isolator VT4090
A very soft isolator with integrated adjustable snubbing. Designed especially for suspension of mobile equipment. Vibration isolation and suspension of…
-
Metal Mount V 118 – MG – V 318
All-metal mounts with equifrequency characteristics for the defined load range.
-
Metal Mount VT3353 – VT3355
Double acting all metal resilient isolator produced of AISI 316 stainless. The progressive spring rate of the cushions yields an…
Related News
News archive![Picture of BN 210 MS RONJA QUEEN](https://www.vibratec.org/app/uploads/2024/03/bn-210-ms-ronja-queen-1280x853.jpeg)
- Marine
Exhaust suspensions and bellows to BN 210 MS Ronja Queen
AAS MEK VERKSTED AS, a well-established costumer of ours, has, among many other vessels, built the BN 210 MS RONJA QUEEN. We at Vibratec are happy for the trust to provide this well-boat with exhaust suspensions and bellows incl. drawing job.
![Image of Sjögull](https://www.vibratec.org/app/uploads/2024/04/01-sjogull-1280x657.jpg)
- Marine
Vibration Isolation of marine engines
If you are planning a midsummer trip in the Stockholm archipelago you can take one of the boats MS Sjögull or MS Sjöbris. You will get a smooth and silent journey as these have recently been renovated; the engines are suspended on Vibratec marine isolators VT41 (spring isolators) with the gear boxes on cushion isolators type VTCI.
Interested in Engine Mounts
Feel free to contact us for more information
Contact us
![](https://www.vibratec.org/app/uploads/2024/01/x3a2117.jpg)
Daniel Johansson
Production, Quality and Environmental Manager Sweden
![](https://www.vibratec.org/app/uploads/2024/03/reza-yazdi-300x300-2.png)
![](https://www.vibratec.org/app/uploads/2024/04/headshot-male-icon-2.png)