Sensitive Equipment
Using Vibratec’s range of Wire Rope Isolators and elastomer shock mounts, your equipment can be suspended and protected successfully.
Examples of common applications are electronic boxes, computers, monitors, radar units and similar. To use the correct dampers for your particular case, Vibratec engineers perform the correct shock calculations.
Products
Here you can see our products in the application area.
Category
-
Elastomer Mount M 7 – M 1500
Low frequency rubber isolator primarily for vibration isolation of rotating machinery. The design allows for large deflection resulting in low…
-
Spring Isolator VT7001
A series of isolators with almost constant natural frequency of 7-11 Hz (within the recommended load range). The isolator is…
-
Spring Isolator VT7002
An all-metal and light weight isolator mount. This series of isolators have an almost constant natural frequency of 7-10 Hz.…
-
Spring Isolator VT4570
A series of low frequency all-metal isolators with a natural frequency of 7-10 Hz within a wide load range. May…
-
Metal Cushion VT1120 – VT1140
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
-
Metal Cushion VT1110, VT1130
All metal resilient element produced of 18/8 steel mesh. The progressive spring rate yields an almost constant natural frequency over…
-
Wire Rope Isolators – WRI-AXX
Wire rope isolators are typically used in aerospace, defense, industrial, and marine applications to reduce the transmission of vibration and…
Interested in Sensitive Equipment
Feel free to contact us for more information
Contact us
